Ai Manchester are raising money for Children in Need!
- By ai_admin ai_admin
- 12 Nov 2018
We are doing our thing for BBC Children in Need at Ai Plastics by hosting a fundraiser event on 16th November 2018!
We are doing our thing for BBC Children in Need at Ai Plastics by hosting a fundraiser event on 16th November 2018!
PEEK, the commonly used abbreviation for PolyEtherEtherKetone, is a semi-crystalline engineering thermoplastic. It is considered to be fairly advanced compared to other engineering plastics due to its very high maximum allowable service temperature in air. Its unique combination of high mechanical properties, temperature resistance and excellent chemical resistance make it the most popular advanced plastic material on the market.
Semiconductors are what have made most of today’s technological advances possible, from the internet to smartphones, they have enabled engineering breakthrough products.
Typically, silicon has been used as the ‘go-to’ material in all things electronic due to its excellent semi-conductivity.
However, as a result of an increasingly competitive market, the need for a better, faster, stronger material has arisen. As plastics are typically insulators, they seem an unlikely candidate for use in semiconductor / electrical applications. However, in recent years, the composition of some plastic materials has been adapted to make these plastic materials behave as conductors or semi-conductors as opposed to insulators.
Ai Engineering Plastics and Laminates has an exclusive partnership with SciCron Technologies, spanning over 15 years, which enables us to supply SciCron antistatic (ESD) sheets and films to the UK market.
Here at Ai Engineering Plastics and Laminates we sell SciCron’s antistatic acrylic AC-300™, polycarbonate PC-350™ and antistatic film products.
You may have heard of PTFE, but have you heard of Fluorosint®, Quadrant’s “PTFE with Muscles”?
Fluorosint® is a range of enhanced PTFE materials developed by Quadrant EPP to fill the performance gaps where unfilled and low-tech, filled PTFE based polymers underperform. Each Fluorosint® material was specifically developed to excel in demanding bearing and seal applications.
Ai Engineering Plastics and Laminates have distributed industrial laminates since 1980. Following our rebranding, we are continuing to invest in our stocks of both industrial laminates and engineering plastics.
Industrial laminates are different to engineering plastics as they are thermosets as opposed to thermoplastics. This means that during production they experience a chemical change and become set, hard solids that cannot be melted or remoulded once they have been cured, unlike thermoplastics which can be melted and remoulded repeatedly.
In the European Union, organisations must follow directives which ensure that employees are protected from explosion risk in areas with an explosive atmosphere. The ATEX Directive, which was first implemented in 2003, and updated in 2014, was created for this reason and consists of two EU directives that describe what equipment and work space is permitted in an environment with an explosive atmosphere.
The polyethylene family of plastics consist of several grades, named according to their density / molecular weight. The 3 standard grades we supply at Ai Engineering Plastics and Laminates are: PE1000 (UHMW-PE), PE500 (HMW-PE) and PE300 (HDPE).
Nylon (PA) 6 & 66 are both synthetic polymers called polyamides, with the numbers describing the type and quantity of polymer chains in their chemical structure. Most nylons, including 6 & 66, are semi-crystalline and possess good strength and durability for demanding applications.