PEEK GF30 Rod
This is an indication of how easily a material can be machined, with 5 being the easiest to machineWear Resistance
This is an indication of how wear resistant a material is, with 5 being the most resistantDimensional Stability
This is an indication of how dimensionally stable a material is, with 5 being the most stableOperating Temp.
This is the recommended maximum continuous operating temperature in degrees Celsius
This 30% glass fibre reinforced grade (colour: brownish-grey) offers a higher stiffness and creep resistance than unreinforced PEEK and has a much better dimensional stability. This grade is very appropriate for structural applications carrying high static loads for long periods of time at elevated temperatures. The suitability of GF30 PEEK for sliding parts, however, is to be carefully examined since the glass fibres tend to abrade the mating surface.
- Reduced expansion rate
- Increased flexural modulus
- Improved strength, stiffness and stability even at temperatures 300°F (150°C)