PEEK

PEEK PlasticPEEK Plastic

Material Description

PEEK is an Advanced Engineering Plastic which combines excellent wear resistance, and very high mechanical properties, dimensional and creep stability even under thermal load. With outstanding chemical resistance and an operating temperature up to 260°C it is often used to make parts that are lighter, stronger and perform in the harshest of environments.


Additionally, the composition of the raw materials used for the manufacture of PEEK which we stock complies with the regulations of the European Union (Directive 2002/72/EC, as amended) and the United States of America (FDA) for plastic materials and articles intended to come into contact with foodstuffs.

Material Characteristics

  • Very high maximum allowable service temperature in air (260 °C continuously, up to 310 °C for short periods of time)
  • High mechanical strength, stiffness and creep resistance, also at elevated temperatures
  • Excellent chemical and hydrolysis resistance
  • Excellent wear & frictional behaviour
  • Very good dimensional stability
  • Excellent resistance to high energy radiation (gamma- and X-rays)
  • Inherent low flammability and very low levels of smoke evolution during combustion

Typical Applications

  • Bushings
  • Bearings
  • Seals
  • Back Up Rings
  • Structural Parts
  • Oil & Gas
  • Aerospace
  • Food Technology
  1. PEEK HPV Rod
    PEEK HPV Rod
    As low as £0.00
  2. PEEK CA30 Rod
    PEEK CA30 Rod
    As low as £0.00
  3. PEEK GF30 Rod
    PEEK GF30 Rod
    As low as £0.00
  4. PEEK Sheet Natural
    PEEK Sheet Natural
    As low as £0.00
  5. PEEK Rod Natural
    PEEK Rod Natural
    As low as £0.00

Specialist Grades of PEEK

Whilst PEEK is an excellent advanced engineering plastic, Quadrant have created a range of specialist PEEK materials with added ingredients to provide enhanced properties compared to standard grade PEEK. Many of these specialist PEEK materials have been developed with specific applications in mind.  

  1. PEEK HPV Rod
    PEEK HPV Rod
    As low as £0.00
  2. PEEK CA30 Rod
    PEEK CA30 Rod
    As low as £0.00
  3. PEEK GF30 Rod
    PEEK GF30 Rod
    As low as £0.00

Fast and efficient

Next day UK delivery

Knowledge and Experience

Expert technical support

Supplied at the size you need

All materials cut to size